Gears of War: E-Day uses aggressive SSD streaming to save 2 GB of RAM
Gears of War: E-Day is taking a highly aggressive approach to asset streaming by leveraging the high bandwidth of NVMe SSDs. Recent measurements show that the game can achieve sustained read rates of around 1.3 GB/s, with peaks reaching up to 3.7 GB/s. This strategy doesn't just speed up loading; it actively reduces the system's RAM footprint by about 2 GB compared to using a SATA SSD, providing a significant benefit for systems with limited memory.
The sheer scale of data being moved is what sets this title apart. While many modern games see SSD activity drop below 100 MB/s once a level is loaded, Gears of War: E-Day maintains a continuous stream of over 1 GB/s in many scenarios. According to technical measurements, the game's activity varies depending on the graphical preset: in the 'Ludicrous' preset, the average read rate was 1.3 GB/s (peaking at 3.7 GB/s) on a high-end system featuring a Ryzen 7 9800X3D and an RTX 5090. The Ultra preset averaged 1.2 GB/s, while the High preset sat around 1.05 GB/s.
Unreal Engine 5 and the 'Virtual' Memory Strategy
This behavior is a direct result of how The Coalition manages assets within the Unreal Engine 5 environment. The developers have previously indicated that they aim to use the fast SSD of the Xbox Series S as an extension of available memory. Instead of keeping massive amounts of geometry and textures permanently resident in the RAM, the engine loads assets just before they are needed and discards them shortly after. This 'just-in-time' approach is what allows the game to offload data to the drive so aggressively.
The impact on system memory is measurable and significant. When installed on an NVMe SSD, the game consumes roughly 2 GB less system RAM than when installed on a SATA SSD. Interestingly, the specific PCIe generation (3.0, 4.0, or 5.0) seems to play a minor role in the total RAM savings; the critical factor appears to be the SSD's ability to provide data with low latency and high throughput. A SATA SSD simply cannot meet these rapid-fire demands, leading to visible delays in the loading of textures, lighting, and shadows, even if the average framerate remains stable.
The 16 GB RAM Bottleneck
The benefits of this technology are most apparent on hardware with limited resources. On a laptop equipped with a Core i7-13620H, an RTX 4060 Laptop GPU, and only 16 GB of DDR5 RAM, the average framerate remained largely similar between NVMe and SATA drives. However, the 1-percent lows—which represent the stutters and frame drops that ruin gameplay smoothness—improved noticeably when using an NVMe SSD. This suggests that the aggressive streaming is most effective when the system is forced to constantly swap assets in and out of a tight memory budget.
However, it is important to note that this does not replace the need for sufficient RAM. Even with multi-gigabyte-per-second throughput, SSDs still suffer from much higher latency than DRAM. The success of this method relies entirely on the engine's ability to predict which assets will be needed next. If the engine miscalculates and requests time-critical data from the SSD, the resulting latency would cause unavoidable stutters. While DirectStorage is part of the PC version, it is the engine's aggressive management strategy, rather than the API alone, that drives these massive read rates.